Home › Heater specs › Scandia Electric Ultra 9.0kW (SN-HE-90240)
Scandia Electric Ultra 9.0kW (SN-HE-90240): Specs, Room Size & Circuit
The Scandia Electric Ultra 9.0kW (SN-HE-90240) is a 9 kW heater for rooms of up to 616 cubic feet. At 240V it needs a 50 A breaker on 8 AWG copper.
| Power | 9 kW |
|---|---|
| Voltage / phase | 240V / 1-ph |
| Current draw | 37.5 A |
| Recommended room | up to 616 cf |
| Stone capacity | — |
| Control | wall |
| IP rating | — |
| Weight | — |
| Warranty | 10 yr |
Specs from the manufacturer source: manual / spec sheet · confidence: high.
Licensed electrician required. This is a reference estimate, not an electrical design. Circuit sizing, GFCI/GFPE requirements, and conductor selection must be verified and installed by a licensed electrician to your local code (NEC and any local amendments take precedence).
What room size?
Rated for up to 616 cf. Glass, cold surfaces, uninsulated walls and outdoor installs raise the requirement, check with the heater-size calculator.
What circuit does it need?
A 9 kW heater at 240V draws 37.5 A → a 50 A breaker with 8 AWG copper on a short run. See breaker, wire & cost for 9 kW ›
Price & where to buy
Not stocked on Amazon, typically sold through the brand or a specialist dealer. Manufacturer page ›