Home › Heater specs › Helo Rocher 700 D
Helo Rocher 700 D: Specs, Room Size & Circuit
The Helo Rocher 700 D is a 6.8 kW heater for rooms of 177–318 cubic feet. At 240V it needs a 40 A breaker on 8 AWG copper.
| Power | 6.8 kW |
|---|---|
| Voltage / phase | 230V / 1-ph |
| Current draw | 28.3 A (calc) |
| Recommended room | 177–318 cf |
| Stone capacity | 220 lb |
| Control | wall |
| IP rating | — |
| Weight | — |
| Warranty | — |
Specs from the manufacturer source: manual / spec sheet · confidence: med.
Licensed electrician required. This is a reference estimate, not an electrical design. Circuit sizing, GFCI/GFPE requirements, and conductor selection must be verified and installed by a licensed electrician to your local code (NEC and any local amendments take precedence).
What room size?
Rated for 177–318 cf. Glass, cold surfaces, uninsulated walls and outdoor installs raise the requirement, check with the heater-size calculator.
What circuit does it need?
A 6.8 kW heater at 240V draws 28.3 A → a 40 A breaker with 8 AWG copper on a short run. See breaker, wire & cost for 6.8 kW ›
Price & where to buy
Not stocked on Amazon, typically sold through the brand or a specialist dealer. Manufacturer page ›