Home › Heater specs › Harvia KIP80B
Harvia KIP80B: Specs, Room Size & Circuit
The Harvia KIP80B is a 8 kW heater for rooms of 251–424 cubic feet. At 240V it needs a 45 A breaker on 8 AWG copper.
| Power | 8 kW |
|---|---|
| Voltage / phase | 240V / 1-ph |
| Current draw | 33.4 A |
| Recommended room | 251–424 cf |
| Stone capacity | 44.1 lb |
| Control | built-in |
| IP rating | IPX4 |
| Weight | 31.5 lb |
| Warranty | 2 yr |
Specs from the manufacturer source: manual / spec sheet · confidence: high.
Licensed electrician required. This is a reference estimate, not an electrical design. Circuit sizing, GFCI/GFPE requirements, and conductor selection must be verified and installed by a licensed electrician to your local code (NEC and any local amendments take precedence).
What room size?
Rated for 251–424 cf. Glass, cold surfaces, uninsulated walls and outdoor installs raise the requirement, check with the heater-size calculator.
What circuit does it need?
A 8 kW heater at 240V draws 33.3 A → a 45 A breaker with 8 AWG copper on a short run. See breaker, wire & cost for 8 kW ›
Price & where to buy
Harvia KIP80B
8 kW · 240V · built-in
8 kW · 240V · built-in