Home › Heater specs › Finlandia FIN-60
Finlandia FIN-60: Specs, Room Size & Circuit
The Finlandia FIN-60 is a 6 kW heater for rooms of 170–300 cubic feet. At 240V it needs a 35 A breaker on 10 AWG copper.
| Power | 6 kW |
|---|---|
| Voltage / phase | 240V / 1-ph |
| Current draw | 25 A |
| Recommended room | 170–300 cf |
| Stone capacity | 45 lb |
| Control | wall |
| IP rating | — |
| Weight | 40 lb |
| Warranty | 1 yr |
Specs from the manufacturer source: manual / spec sheet · confidence: high.
Licensed electrician required. This is a reference estimate, not an electrical design. Circuit sizing, GFCI/GFPE requirements, and conductor selection must be verified and installed by a licensed electrician to your local code (NEC and any local amendments take precedence).
What room size?
Rated for 170–300 cf. Glass, cold surfaces, uninsulated walls and outdoor installs raise the requirement, check with the heater-size calculator.
What circuit does it need?
A 6 kW heater at 240V draws 25 A → a 35 A breaker with 10 AWG copper on a short run. See breaker, wire & cost for 6 kW ›
Price & where to buy
Finlandia FIN-60
6 kW · 240V · wall
6 kW · 240V · wall