Home › Compare › KIP60W vs 6kW Built-In (SCA-60NS)
Harvia KIP60W vs Vevor 6kW Built-In (SCA-60NS)
Side-by-side specs and the circuit each needs, the numbers, not opinions.
| Harvia KIP60W | Vevor 6kW Built-In (SCA-60NS) | |
|---|---|---|
| Power | 6 kW | 6 kW |
| Current draw (240V) | 25 A | 25 A |
| Breaker / wire | 35A / 10 AWG | 35A / 10 AWG |
| Recommended room | 170–300 cf | 176.5–317.8 cf |
| Stone capacity | 44 lb | 33 lb |
| Control | wall | built-in |
| IP rating | IPX4 | — |
| Warranty | 2 yr | 1 yr |
| Price | price loading… view | price loading… view |
Prices from our Amazon cache where available; specs from each manufacturer manual.
Which should you get?
Output is identical, so decide on control and stones.
FAQ
Is the Harvia KIP60W or Vevor 6kW Built-In (SCA-60NS) bigger?
They are the same output, both 6 kW, so neither heats a bigger room than the other. With size off the table the decision comes down to control type, how much stone each holds (more stone gives a softer, longer-lasting steam), warranty and price, all laid out in the table above.
Do the Harvia KIP60W and Vevor 6kW Built-In (SCA-60NS) need the same circuit?
Yes. Both draw close enough that they land on the same 35 A breaker at 240V with 10 AWG copper on a short run, so swapping one for the other later would not mean re-wiring. Long cable runs can still push either up a wire size for voltage drop.