Home › Compare › KIP60W vs DROP 6kW
Harvia KIP60W vs HUUM DROP 6kW
Side-by-side specs and the circuit each needs, the numbers, not opinions.
| Harvia KIP60W | HUUM DROP 6kW | |
|---|---|---|
| Power | 6 kW | 6 kW |
| Current draw (240V) | 25 A | 25 A |
| Breaker / wire | 35A / 10 AWG | 35A / 10 AWG |
| Recommended room | 170–300 cf | 176.6–317.8 cf |
| Stone capacity | 44 lb | 121.3 lb |
| Control | wall | wifi |
| IP rating | IPX4 | — |
| Warranty | 2 yr | 5 yr |
| Price | price loading… view | price loading… view |
Prices from our Amazon cache where available; specs from each manufacturer manual.
Which should you get?
Output is identical, so decide on control and stones. Want app/Wi-Fi control and remote pre-heat? That points to the HUUM DROP 6kW. More stone mass (softer, longer-lasting löyly) favours the HUUM DROP 6kW.
FAQ
Is the Harvia KIP60W or HUUM DROP 6kW bigger?
They are the same output, both 6 kW, so neither heats a bigger room than the other. With size off the table the decision comes down to control type, how much stone each holds (more stone gives a softer, longer-lasting steam), warranty and price, all laid out in the table above.
Do the Harvia KIP60W and HUUM DROP 6kW need the same circuit?
Yes. Both draw close enough that they land on the same 35 A breaker at 240V with 10 AWG copper on a short run, so swapping one for the other later would not mean re-wiring. Long cable runs can still push either up a wire size for voltage drop.